For product support, visit
CSS2123/F7
EN
ES
User manual
Manual del usuario
FR-CA Manuel d’utilisation
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact
Philips Customer Care Center at 1-866-309-0846
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 6200
ES: Para obtener mas informacion, llame al servicio de soporte al cliente de su pais.
• Para obtener asistencia en los Estados Unidos, en Canada, Puerto Rico o en las Islas Virgenes de los Estados
Unidos, comuniquese con Centro de atencion al cliente de Philips al 1-866-309-846
• Solo para Mexico CENTRO DE ATENCION A CLIENTES LADA, 01 800 504 62 00 Solo Para Mexico.
FR: Pour obtenir de l’aide supplementaire, communiquez avec le centre de service a la clientele de votre pays.
• Pour obtenir de l’aide aux Etats-Unis, au Canada, a Puerto Rico ou aux lles Vierges americaines, communiquez
avec le centre de service a la clientele Philips au : 1-866-309-0846
• Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips a 01 800 504 62 00
P&F USA Inc.
1 Help and support
2 Notice
This section contains the legal notices.
FAQs
If you have a problem, refer to the frequently
asked questions (FAQs) for this SoundBar at www.
philips.com/support.
Copyright
If you still need help, contact Philips Consumer
Care in your country.
Warning
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
• Do not attempt to repair your SoundBar
yourself.This may cause severe injury, irreparable
damage to your SoundBar, or void your warranty.
Compliance
Contact Philips
If you contact Philips, you will be asked for the
model and serial number of your product.The
model number and serial number are on the back
or bottom of your product. Note the numbers
before you call Philips:
Model No. __________________________
Serial No. ___________________________
Note
• This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
•
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
2
EN
To assure continued compliance, any changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s
authority to operate this equipment. (Example-
use only shielded interface cables when connecting
to computer or peripheral devices).
This equipment complies with Part 15 of FCC RF
Rules. Operation is subject to the following two
conditions:
3 Important
Read and understand all instructions before you
use your SoundBar. If damage is caused by failure
to follow instructions, the warranty does not apply.
1
2
This device may not cause interference, and
Important safety instructions
This device must accept any interference,
including interference that may cause
undesired operation of the device.
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Caution
• The manufacturer is not responsible for any
radio orTV interference caused by unauthorized
modifications to this equipment. Such
modifications could void the user authority to
operate the equipment.
•
FCC Radiation Exposure Statement:This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with a minimum distance of 20cm between the
radiator and your body.This transmitter must not
be co-located or operated in conjunction with any
other antenna or transmitter.
WARNING: Changes or modifications made to
this equipment not expressly approved by Philips
may void the FCC authorization to operate this
equipment.
•
Do not defeat the safety purpose of the
polarized or grounding-type plug.A polarized
plug has two blades with one wider than
the other.A grounding type plug has two
blades and a third grounding prong.The wide
blade or the third prong are provided for
your safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
Model number: PHILIPS CSS2123/F7
Trade Name: Philips
Responsible Party: P&F USA, Inc. PO Box 2248
Alpharetta, GA 30023-2248; 1-866-309-0846
•
•
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point where
they exit from the apparatus.
Only use attachments/accessories specified
by the manufacturer.
Notice for Canada
Class B Clause
This digital apparatus does not exceed the Class
B limits for radio noise emissions from digital
apparatus as set out in the Radio Interference
Regulations of the Canadian Department of
Communications.
This Class B digital apparatus complies with
Canadian ICES-003.
•
Use only with the cart, stand, tripod, bracket
or table specified by the manufacturer or
sold with the apparatus.When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
EN
3
•
•
Unplug this apparatus during lightning storm
or when unused for long periods of time.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Battery usage CAUTION -To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
•
•
Disconnect the mains plug to shut off when
find trouble or not in use.The mains plug
shall be readily operable.
Do not place this apparatus on the furniture
that is capable of being tilted by a child and
an adult leaning, pulling, standing or climbing
on it.A falling apparatus can cause serious
injury or even death.
This apparatus should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided. Make
sure to leave a space of 7.8 inches (20cm) or
more around this apparatus.
•
•
Class II equipment symbol
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
This symbol indicates that the unit has a double
insulation system.
•
The product/remote control may or may
not contain a coin/button type battery, which
can be swallowed. Keep the battery out of
reach of children at all times! If swallowed,
the battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
•
•
If the battery has been swallowed, seek
immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after you
replace the battery.
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
•
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
•
•
Apparatus shall not be exposed to dripping
or splashing.
Do not place any sources of danger on the
apparatus (for example. liquid filled objects,
lighted candles).
This apparatus may contain lead and mercury.
Dispose according to local, State or Federal
laws. For disposal or recycling information,
please contact your local authorities. For
additional assistance on recycling options,
Use of controls or adjustments or
The 'exclamation point' calls attention to features
for which you should read the enclosed literature
closely to prevent operating and maintenance
problems.
WARNING:To reduce the risk of fire or electric
shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids, such
as vases, should not be placed on this apparatus.
CAUTION:To prevent electric shock, match wide
blade of plug to wide slot, fully insert.
•
•
performance of procedures other than herein
may result in hazardous radiation exposure
or other unsafe operation.
Care for your product
Use only microfiber cloth to clean the product.
4
EN
4 Your SoundBar
Care of the environment
Congratulations on your purchase, and welcome
to Philips!To fully benefit from the support that
Philips offers, register your SoundBar at www.
philips.com/welcome.
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused. Please visit www.
recycle.philips.com for additional information on a
recycling center in your area.
Main unit
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on the
environment and human health.
1
2
The batteries supplied do not contain the heavy
metals mercury and cadmium. Nevertheless, in
many areas batteries may not be disposed of with
your household waste. Please ensure you dispose
of batteries according to local regulations.
For perchlorate material, special handling may
perchlorate.
a SURR
Lights up when virtual surround mode is on.
b Source indicators
•
•
•
•
COAXIAL: Lights up when you switch to
coaxial input source.
OPTICAL: Lights up when you switch to
optical input source.
AUX: Lights up when you switch to
analog input source.
MUSIC iLINK: Lights up when you switch
to Music iLink input source.
EN
5
f BASS +/-
Increase or decrease bass.
Remote control
g MUTE
Mute or restore volume.
1
2
7
6
3
4
5
a
(Standby-On)
Switch the SoundBar on or to standby.
b Source buttons
•
•
•
•
AUX: Switch your audio source to the
AUX connection.
OPTICAL: Switch your audio source to
the optical connection.
COAXIAL: Switch your audio source to
the coaxial connection.
MUSIC iLINK: Switch your audio source
to the MUSIC iLINK connection.
c SURROUND
Switch to virtual surround mode on or off.
d TREBLE +/-
Increase or decrease treble.
e VOL +/-
Increase or decrease volume.
6
EN
Replace battery
5 Connect your
SoundBar
Warning
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• The product/remote control may or may not contain a
coin/button type battery, which can be swallowed. Keep
the battery out of reach of children at all times!
This section helps you connect your SoundBar to a
TV and other devices.
For information about the basic connections of
your SoundBar and accessories, see the quick start
guide. For a comprehensive interactive guide, see
Caution
• The battery contains perchlorate material,
handle it with care. For information see www.
dtsc.ca.gov/hazardouswaste/perchlorate.
Note
• For identification and supply ratings, refer to the
type plate at the back or bottom of the product.
• Before you make or change any connections,
make sure that all devices are disconnected from
the power outlet.
1
Subwoofer
Follow the steps below to position and connect
your subwoofer.
2
3
Position
Place the subwoofer at least one meter (three
feet) away from either to the left or right of your
SoundBar, and ten centimeter away from the wall.
For best results, place your subwoofer as shown
below.
1
2
Open the battery compartment.
Insert one CR2025 battery, with the polarity
(+/-) as indicated.
3
Close the battery compartment.
EN
7
Rear left
L
COAXIAL
OPTICAL
(WHITE)
AUX
R
(RED)
AUDIO IN
DIGITAL IN
SUBWOOFER (8Ω)
1
2
3
4
a SUBWOOFER
Connect to the supplied subwoofer.
b AUDIO IN-AUX
Connect to an analog audio output on theTV
or an analog device.
c DIGITAL IN-COAXIAL
Connect to a coaxial audio output on theTV
or a digital device.
Connect
Connect your subwoofer to your SoundBar as
described in the quick start guide.
d DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
Connectors
Rear right
Connect other devices to your SoundBar.
Side right
AC MAINS~
AC MAINS~
Connect to the power supply.
Connect audio fromTV and
other devices
MUSIC iLINK
Audio input from an MP3 player.
Play audio fromTV or other devices through your
SoundBar. Use the best quality connection available
on other devices.
The audio connections in this user manual are only
recommendations.You can use other connections
too.
8
EN
Before you start
•
On PhilipsTV, select Setup (Setup) >
Channel settings (Channel settings) >
Preferred audio format (Preferred audio
format) > Standard (Standard) from your
home menu.Then, mute theTV to play the
TV audio through your SoundBar.
•
•
On non-PhilipsTV, select ‘PCM’ (PCM) or
‘Standard’ (Standard) from theTV audio
menu. For detailed steps, see theTV user
manual.Then, mute theTV to play theTV
audio through your SoundBar.
On other devices such as DVD player or Blu-
ray player, Select ‘PCM’ (PCM) from the audio
output of the device.
Option 3: Connect audio through analog
audio cables
Basic quality audio
Using an analog cable, connect the AUX
connectors on your SoundBar to the audio
connectors on the device.
Note
• Due to copyright restrictions, the broadcaster
may mute PCM audio over Digital Audio Output
for certain channels, shows, or segments during
the broadcast.
VCR
Option 1: Connect audio through a digital
optical cable
Best quality audio
Using an optical cable, connect the OPTICAL
connector on your SoundBar to the OPTICAL
OUT connector on the device.
The digital optical connector might be labeled
SPDIF, SPDIF OUT, or OPTICAL.
TV
Option 2: Connect audio through a digital
coaxial cable
Good quality audio
Using a coaxial cable, connect the COAXIAL
connector on your SoundBar to the COAXIAL/
DIGITAL OUT connector on the device.
The digital coaxial connector might be labeled
DIGITAL AUDIO OUT.
EN
9
6 Use your SoundBar
Change treble or bass
Change the high frequency (treble) or low
frequency (bass) settings of the SoundBar to suit
your video or music.
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
•
Make the necessary connections described in
the quick start guide and the user manual.
Switch the SoundBar to the correct source
for other devices.
•
Press TREBLE +/- or BASS +/- to increase or
decrease treble or bass.
•
The Source indicators on the front panel
blink thrice when the treble or bass is set to
either minimum or maximum.
Play audio fromTV or other
devices
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
Press the Source buttons to select the audio
output of the connected device.
Press SURROUND repeatedly to switch surround
mode on or off.
» When surround mode is on, the SURR on
Adjust the volume
the front panel lights up.
MP3 player
Connect your MP3 player to play your audio files
or music.
What you need
To increase or decrease volume, press VOL +/-.
•
The Source indicators on the front panel
blink thrice when the volume is set to either
minimum or maximum.
•
•
An MP3 player.
A 3.5mm stereo audio cable.
To mute sound, press MUTE.
•
The current Source indicator on the front
panel blinks continuously.
Play music
To restore the sound, press MUTE again or press
VOL +/-.
1
2
Connect the MP3 player to the SoundBar as
described in the Quick start guide.
Press MUSIC iLINK.
» MUSIC iLINK indicator on the front
panel lights up.
Choose your sound
3
Press the buttons on the MP3 player to select
and play audio files or music.
This section helps you choose the ideal sound for
your video or music.
10 EN
7 Wall mount
Apply factory settings
You can reset your SoundBar to the default
settings programmed at the factory.
Within three seconds, press BASS+,VOL-, and
TREBLE+.
» When the restore factory settings process
is complete, the SoundBar automatically
switches off and turns back on again.
Make sure that you use the screws andbrackets
specified by the manufacturer or sold with the
apparatus. Secure the wall mount to a wall that
can support the combined weight of the product
and the wall mount. For information about the size
of the keyhole on your SoundBar’s mount, see the
Quick Start Guide.
0.12 - 0.14”
> 0.98”
Note
• Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that
results in accident, injury or damage. If you have
any query, contact Philips Consumer Care in
your country.
EN 11
8 Product
specifications
9 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing
of the product.
Note
• Specifications and design are subject to change
without notice.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
com/support.
Amplifier
•
•
•
Total output power: 60W RMS (30%THD)
Frequency response: 20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Main unit
SURR on the front panel blinks continuously.
•
Input sensitivity:
•
Your SoundBar does not support Dolby or
DTS encoded audio. Make sure that you
change the audio output of theTV or device
to 'Standard' or 'PCM'.
•
AUX: 600 mV
Music iLink: 250 mV
•
Audio
•
S/PDIF Digital audio input:
Sound
•
•
Coaxial: IEC 60958-3
Optical:TOSLINK
No sound from SoundBar speakers.
•
Main unit
•
•
Connect the correct audio cable from your
SoundBar to yourTV or other devices.
On your SoundBar remote control, press the
Source buttons to select the correct audio
input.
•
•
•
•
Power supply: 110-240V~, 50-60 Hz
Power consumption: 20 W
Standby power consumption: ≤ 0.5 W
Speaker impedance: 4 ohm woofer, 4 ohm
tweeter
Speaker drivers: 25 x 120 mm (1 x 5")
woofer, 38 mm (1.5") tweeter
Frequency response: 150 Hz-20 kHz
Dimensions (WxHxD): 708 x 47 x 65 mm
Weight: 1.03 kg
•
Make sure that the SoundBar is not muted.
'Adjust the volume' on page 10).
•
•
•
•
Distorted sound or echo.
•
If you play audio from theTV through the
SoundBar, make sure that theTV is muted.
Subwoofer
•
•
•
•
•
•
Impedance: 8 ohm
Speaker drivers: 130 mm (5.25") woofer
Frequency response: 20 Hz-150 Hz
Dimensions (WxHxD): 165 x 240 x 295 mm
Weight: 2.6 kg
Cable length: 3 m
Remote control batteries
•
1 x CR2025
12 EN
ONE (1) YEAR LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
WHO IS COVERED:
This product is warranted to the original purchaser or the per-
son receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
This Limited Warranty does not cover:
•
•
Shipping charges to return defective product.
Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
Damage or claims for products not being available for use, or
for lost data or lost software.
Damage from mishandled shipments or transit accidents when
returning product.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
Product lost in shipment and no signature verification receipt
can be provided.
Failure to operate per Owner’s Manual.
•
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company property. When a
refund is given, your product becomes the company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
•
•
•
•
•
•
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
Contact Customer Care Center at:
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
1-866-309-0846
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The company is not liable for any damage to or loss of any ,
programs data, or other information stored on any media
contained within the product, or any non-Philips product or part
not covered by this warranty. Recovery or reinstallation of
programs, data or other information is not covered under this
Limited Warranty.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
an Authorized Service Location, (c) to a product or
a part that has been modified without written permission,
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248
EN
P&F USA, Inc.
PO Box 2248 Alpharetta, GA 30023-2248
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
sgpam_1150/F7_v1
|